 | The Hondata S100 system allows your OBD1 Honda Civic/ Integra ECU to be tuned by any Hondata Dealer or Tuner with Rom Editor V3 or V4 and a chip programmer. This system is ideal for those who would like a more advanced system over the basic chipped ECU. MSRP: $195.00 YOUR price: $195.00 |
|
 | We are proud to offer Hondata's top of the line tuning products like the Hondata S300 to our valued customers. The S300 is by far one of the most advanced Honda / Acura tuning systems on the market. It offers superior tunability with forced induction support, datalogging, boost control capabilities, and so much more. MSRP: $495.00 YOUR price: $495.00 |
|
 | The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any Honda K Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors. MSRP: $995.00 YOUR price: $995.00 |
|
 | The Hondata Coil Pack Retrofit allows you to use individual coil pack (coil on plug) with your S300, replacing the stock igniter, coil, rotor and spark plug leads. The advantage of this is more spark energy, less electrical interference and increased reliability. MSRP: $395.00 YOUR price: $395.00 |
|
 | Now available for the 2006 and newer Civic Si is the Hondata FlashPro! The flashpro allows full tuning of the Civic Si directly through the diagnostic port. No physical modification to your Honda ECU is required! MSRP: $695.00 YOUR price: $695.00 |
|
 | Hondata FlashPro system for 06+ Honda S2000. The Hondata FlashPro for the US 2006 and newer S2000 allows full programming of the factory S2000 ECU through the factory obd2 diagnostic port. Simply plug the FlashPro into the diagnostic port, and the other end into your laptop via USB cable. MSRP: $695.00 YOUR price: $695.00 |
|
 | Control your boost pressure to avoid costly engine damage and increase acceleration with this Hondata Boost Control Solenoid. For use with the s300, K-Pro, and 2006+ Civic Si, the Hondata Normally Closed boost control solenoid is designed for use in high boost applications, but also works well in low boost applications. This boost control solenoid allows you to take advantage of the Hondata boost control features and control how much boost you are running directly from your ECU. MSRP: $100.00 YOUR price: $100.00 |
|
 | This Hondata 4 bar map sensor is a completely plug and play design and can accurately read boost pressure on Honda engines up to 4 bar. The simple plug and play installation will have you ready to tune in less than one minute. MSRP: $99.00 YOUR price: $99.00 |
|
 | 4 bar (approx 43 psi max) map sensor for the 06-09 Honda S2000 with the drive by wire throttle body. This 4 bar Hondata Map sensor fits plug and play on the 06 up S2000 throttle body which allows much more boost when used in conjunction with the Hondata S2000 Flashpro or other engine management system. MSRP: $99.00 YOUR price: $99.00 |
|
 | The Hondata 4 bar K series map sensor is designed for a simple plug and play installation on K20 and K24 engines. No splicing, cutting, or modification is needed. Simply unscrew your stock Honda map sensor, screw the Hondata Map Sensor in place, plug in, and go. MSRP: $99.00 YOUR price: $99.00 |
|
 | Complete Hondata P28 with built in OBD2a to OBD1 conversion. Includes pre-installed brand new serialized Hondata S300 system. Eliminates the need for a separate OBD2A to OBD1 ECU jumper harness for a clean, professional install. MSRP: $790.00 YOUR price: $790.00 |
|
 | Complete Hondata P28 with built in OBD2B to OBD1 conversion. Fully equipped with a brand new, serialized S300 system pre-installed. Eliminates the need for a separate OBD2B to OBD1 ECU jumper harness. MSRP: $790.00 YOUR price: $790.00 |
|
 | New replacement 4 pin interconnect cable for Hondata S200 systems. Connects your 4 pin header at CN2 on your ECU to the Hondata S200 box. MSRP: $19.00 YOUR price: $19.00 |
|