HA Motorsports custom ECU jumper harness for 96-98 OBD2A Honda Civic with an automatic transmission B series engine swap. The stock 96-98 civic with an automatic transmission uses an ECU that controls both the engine and auto transmission all from the ECU. When installing an automatic B series engine swap into this chassis, you will encounter a problem with finding an ECU that will run the engine and transmission together as B series integra's use separate transmission control units. Using our custom harness, you will be able to use one of our OBD1 auto ECU packages and an OBD1 P78 transmission control unit in your civic and tune your engine while letting the P78 transmission control unit handle automatic transmission operation!
- Uses all OEM connectors and pins for OE quality fitment and reliability.
- MUST be used with one of our OBD1 auto ECU packages and OBD1 P78 Transmission control unit. Will not work with any other ECU or transmission control unit.
- We recommend using an OBD1 style B series transmission for this setup.
- All HA Motorsports ECU's, products, and services include a One Full-Year VIP Warranty
QUESTIONS & ANSWERSAsk a Question
I have a 96 ej8 with a d16z6 & a stock automatic p28... will this work for my car... my wire harness/car is OBD2A & my engine is OBD1
No this harness is for use with a Bseries engine and B series auto transmission.
You can only use the automatic P28 if you swap out your 96 auto transmission with a 92-95 Civic auto transmission. We can then build a custom OBD2A to OBD1 harness for you to use the auto P28. It will NOT work with the 96-00 D series auto transmission.