Sensors / Wideband / Gauges and Displays

The evolution of the world’s most popular stand alone digital O² sensor controller, the Innovate Motorsports LC-2 builds upon the legacy of the LC-1 by adding simplicity and leading edge technology. The LC-2 utilizes the only 100% digital wideband air/fuel ratio technology on the market!

AEM wideband AFR gauge kit featuring the new Bosch LSU4.9 sensor. The AEM UEGO wideband unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED “needle” that changes colors as AFR changes from rich to lean. A 52mm (2-1/16") gauge housing ensures that it will fit in most gauge pods and can be remotely mounted virtually anywhere.

For optimum power and safety, measuring your air/fuel ratio is imperative when tuning. The Grams Wideband Air/Fuel Gauge measures at 52mm (2.047”) with an LED display that features a 3 color sweep from red, yellow to green. The Grams Wideband utilizes the latest Bosch® 4.9 LSU sensor that displays an easy to read 4 digit display with speedy accuracy down to 0.001.

The all-new Tunerview RD-2 is here. The revolutionary RD2 display allows the tuner or driver to view engine sensor readings in real-time.

The new Innovate Motorsports MTX Digital Series “Dual Function” Water Temperature & Battery Voltage is now available! This “Dual Function” gauge is the perfect way to monitor critical engine parameters on one display. The 2 1/16” (52mm) gauge features a water resistant casing, interchangeable faceplates and bezels, and locking connectors for simplified installation.

The New Innovate MTX-L PLUS wideband gauge features Innovate's patented DirectDigital™ technology and all-new Advanced Sensor Control which receives feedback from the sensor more frequently and optimizes heater control. The combination of these technologies makes the MTX-L Plus the fastest, most durable and accurate air/fuel ratio gauge ever!

Innovate Dual Function Gauge kit. Combines and ethanol content sensor and fuel temperature sensor onto one beautiful gauge for easy viewing and monitoring of ethanol content on E85 fuel setups, as well as fuel temperature. The gauge kit includes two analog output wires so that you can send your ethanol content and fuel temperature readings to your tuning system.

The Innovate Motorsports SCG-1 is a revolutionary approach to boost control that integrates an advanced standalone boost controller with Innovate’s industry leading DirectDigital™ wideband air fuel ratio technology.

Innovate Replacement Bosch LSU 4.9 Sensor. Compatible with the Innovate LM-2, LC-2, and MTX-L, MTX-L Plus, SCG-1, DLG-1, PSB-1, and PSN-1.

Ethanol content sensor for E85 fuel when running E85 and a Hondata engine management system. Setup your S300 tune to automatically compensate for ethanol level fluctuations so that you can fill up at any station without worrying about the quality of their E85 fuel.

Make installation of an ethanol/flex-fuel sensor easy with the HA Motorsports custom assembled ethanol sensor wire harness. This harness has a built in 2.4k Ohm resistor and 8 feet of wire for easy connection to your S300V3 analog input connector.

HA Motorsports custom assembled plug-n-play wire harness for use with the HA Motorsports E85 ethanol content sensor. This harness has brand new connectors, and 6 feet of wire for easy connection to your Kpro4 analog input connector. The harness features color-coded automotive TXL wire that exceeds OEM specifications and is resistant to moisture, grease, oil, gasoline, and most acids and solvents making it very durable for engine compartments.

The Swapbox is a revolutionary piggy-back device that allows the 02-04 Rsx / Civic Si ECU's immobilizer to be bypassed. The Swapbox-K features simple, 4 wire connection which can be spliced into your harness near your ECU. After connection, the immobilizer will now be disabled and allow the ECU to start without a programmed chipped key.

HA Motorsports 4 port boost control solenoid with fittings kit. By using a 4 port boost control solenoid, you are able to run a vacuum line to both the top and bottom of your turbocharger's wastegate. The result is much greater control over boost levels.

Mounting bracket with screws for 4 port boost control solenoids. This bracket will allow you to securely, and professionally, mount your boost control solenoid in your engine compartment. Includes two machine screws for securing solenoid to the bracket.

Aluminum coil-on-plug adapter plate with RyWire logo. This coil on plug adapter plate will allow you to bolt S2000 or K series ignition coils onto your B series engine for use with the Hondata CPR kit.

This is the replacement "C03" cable for the Tunerview RD2. The C03 cable comes with straight loose ends for connecting to CAN ECU's such as AEM Infinity Hondata, Motec, Haltech, etc.