HA Motorsports OBD2A to OBD2B ECU Jumper Harness. Allows simple, plug-n-play conversion from OBD2A to OBD2B. Uses all new OEM connectors for OE quality fitment. HA Motorsports ECU jumper harnesses are constructed using cross-linked automotive TXL wire that exceeds OEM specifications and is extremely durable.
For installing an OBD2B manual transmission ECU into the following vehicles:
- 1996-1999 Acura Integra with manual transmission
- 1996-1998 Honda Civic with manual transmission
- 1996-1997 Honda Accord 4 cylinder with manual transmission
- 1996-2001 Honda Prelude with manual transmission
All HA Motorsports ECU's, products, and services include a One Full-Year VIP Warranty
NOTE: Some OBD2B ECU's have an immobilizer system that will prevent the car from starting without a properly programmed key and immobilizer system. If your ECU has an immobilizer (ie: 00-01 Integra ECU, 98-02 Accord ECU), please see our immobilizer removal service for these ECU's.
QUESTIONS & ANSWERS
Ask a Question-
I have a 98 civic ex that i plan on swapping out my d16y8 to a 99 crv b20z2 so is this the correct jumper obd2a to obd2b?
If you will be using the 99 CRV ECU, and your 98 Civic has a manual transmission, then yes this is the correct harness. Thanks,
-
I’m running a b16a2 motor with manual transmission in my 97 ls integra I used my LS engine harness so I am aware that I’m going to have to wire up VTEC and the pressure switch for VTEC and I got a p2t ecu with swap will this harness jumper work for the P2 T to the original 97 ls ECU harness
Yes, this will be the correct harness to adapt from your 97 Integra ECU plugs on your vehicle to the 99-00 Civic Si P2T ECU. You will need to add the VTEC solenoid, VTEC pressure switch, and knock sensor wiring to your engine harness. Thanks,