KTuner for 08-12 Accord V6.  The KTuner Flash system allows you to reprogram/reflash your stock Honda ECU directly over your OBD2 diagnostic port. No need to remove your ECU, etc.  Simply plug the KTuner Flash system into your OBD2 port under your dash and reflash or tune your car using the KTuner software.  Using the KTuner Flash system, you can retain all of your factory drivability, emissions, and reliability, while still being able to tune your engine for modifications (ie: intake, exhaust, cam upgrades, etc). The result will be a much better running engine with increased power!

Features:

• Real-Time Logging
• Ignition/Fuel Tuning
• Knock Tuning
• Throttle Control Maps
• Rev Limiter Settings
• 2-Step Settings
• VTEC Window Control (manual transmission)
• Closed Loop Control
• Disable Sensors
• Fuel Cut Parameters
• Fuel Correction Parameters
• Ignition Correction Parameters
• Idle Control Parameters

Includes reflash maps covering up to Intake, RV6 PCDs, and Exhaust.
Tuned reflashes recommend 91+ octane.

Dyno Testing:
2010 AT V6 – AT gains are not reflective of MT testing
Tuned at 1100ft on 91 octane.
Bottom red dashed line is factory with factory tune. Only mod is Takeda Intake. Best baseline run.
Middle blue dashed line is with KTuner Tuning. Only mod is Takeda Intake.
Top solid blue line is intake and PCDs with KTuner tune. Intake + PCDs + Tune.
Click for a larger view.

The graph below shows factory tune to final tune. Only mod is Takeda Intake.

2010 MT V6

Speed limiter completely removed. Please adhere to your tire speed limitations and note this feature is for off-road use only.