WARNING! THIS PRODUCT IS FOR OFF-ROAD MOTORSPORT/COMPETITION RACING USE ONLY, NEVER TO BE USED ON ANY POLLUTION CONTROLLED MOTOR VEHICLE.
An HA Motorsports exclusive, the KTuner Revision 1 / 01-05 Civic D17A ECU package is a specially developed ECU package that allows full tuning and datalogging using the KTuner software for the 01-05 Civic with D17A1/2 engine. The package consists of a specially developed ECU for the 01-05 Civic, with a fully installed and tested KTuner End-user system.
Important: An HA Motorsports 01-05 Civic D17A to KTuner ECU Jumper is required to use this ECU package and is sold separately. This setup combines to allow tuning your D17A1 or D17A2 engine via the KTuner software!
Fits:
- 01-05 Honda Civic with D17A1/2 engine and manual transmission.
- Does NOT work with auto transmission
Included with this ECU package:
- HA Motorsports specially prepped K Series ECU - fits directly in place of the stock 01-05 Civic ECU!
- KTuner End-User system - fully installed into ECU.
- Clear ECU cover with etched "KTuner" logo.
- FREE KTuner starting calibrations for use with this ECU package. See our KTuner downloadable calibration for the D17A here
What else do I need to use this ECU?
- HA Motorsports 01-05 Civic D17A to KTuner jumper harness.
- Laptop computer running Windows XP or newer
- Internet connection when connecting to your ECU for the first time to register your system and setup a KTuner account (free). To see what is involved in setting up your KTuner account, see the KTuner getting started guide here.
Notes:
- The rear (secondary) sensor must be disabled on all applications.
- The D17 engine knock sensor is not compatible, so it must be disabled on all applications.
- 04-05 Civic DX, LX, or EX with D17A1 or D17A2 engine, and 01-03 Civic HX - install a KTuner compatible primary/upstream air/fuel sensor if you'd like to run wideband closed loop.
- 01-03 Civic DX, LX, or EX with D17A1 or D17A2 engine requires OBD2 and both O2 sensors to be disabled (the vehicle does not have circuitry, etc. to run a wideband primary air/fuel sensor).
QUESTIONS & ANSWERS
Ask a Question-
Where do I get the jumper harness? I cant seem to find it.
You'd use this harness: https://www.hamotorsports.com/products/01-05-civic-d17a-to-ktuner-ecu-jumper
Thanks,
-
Hello, does the KTuner Revision 1 / 01-05 Civic D17A ECU Package work for d17a JDM Automatic transmission?
This is for use with manual transmissions only. Thanks,
-
Can I still use this ecu if I do a k series swap later on 2001 Honda civic lx sedan manual
This ECU can be used with a K series engine if you decide to later swap in a K series. You will obviously need to use a K series engine harness, K swap chassis adapter, etc. but the ECU itself can be re-used. Just upload a suitable basemap for the new engine and tune from there.
-
Do i need to change the cam gear with this ecu?
You don't need to change the cam gear when using our signal converter jumper as shown here: https://www.hamotorsports.com/collections/ecu-jumper-harnesses-manual-transmission-vehicles/products/01-05-civic-d17a-to-ktuner-ecu-jumper
Customer Reviews
exactly what i expected for the price good quality ecu with full tuning capabilities on a single cam i was impressed to say the least
