Use the Rywire D/B series chassis specific adapter to install a Rywire D/B series tucked harness in your chassis.  This chassis specific adapter adapts the Rywire D/B series tucked harness to fit your vehicle's cabin harness.

This harness plugs directly in.  There are three extra wires on the harness:

The extra wires are as follows:

• labeled wht/blk (extra - no connection required)
• labeled orn/blk (extra - no connection required)
• labeled brown/white - this is your SCS (service check signal). Connect it to ground to flash check engine light codes on your gauge cluster if/when desired.