Home » Hondata 1.5 Turbo Denso Fuel System
(0)

Hondata 1.5 Turbo Denso Fuel System

- 1 In Stock
$2,600.00 USD

The Hondata fuel system for the Honda L15B turbo 10th Gen Civic Si (2017-2021) consists of hardware components and FlashPro Manager software changes designed to deliver significantly more fuel flow over stock (35% Injector, 39% cam/pump combo). This system enables your 1.5L turbo Honda Civic Si to take the next logical step for a reliable, well engineered and thoroughly tested fuel delivery solution. The Hondata 1.5L fuel system hardware paired with our proprietary software delivers fuel for those of you who have modifications that are limited by the stock fuel system. Although the camshaft does not make HP, it plays a key role in allowing you to use your FlashPro to tune for maximum power without the loss of fuel pressure. So, if you’re ready to fuel more power or you’re simply tired of blending and would like the ability to run full E85 with your flex fuel kit, the Hondata Fuel System Upgrade is right for you.

The Kit Includes:

  • Installation instructions
  • High Flow Fuel Injectors & Clips
  • High Flow High Pressure Fuel Line
  • Injector Fly Leads
  • Camshaft
  • FlashPro software includes the mod for injector and camshaft support

Unlock codes are single-use only. If you need to use it again, a new purchase is required on Hondata's website.

Do I need a FlashPro?

Yes, a Hondata FlashPro is required.

What vehicles does this cover?

The L15B7 Civic turbo

Can I apply this to existing calibrations

There is a modification which will apply for any existing calibration you may have.  You then have the  ability to tune for more boost without loss of fuel pressure.

Was this testing done with a built engine?

The high horsepower testing was done with a built engine. The greater the torque and power the more you will need a built engine.

Are the parts available separately?

No

How long does it take to install this kit

4 hours to 1 day depending on experience and tools. An experienced mechanic is recommended for install.

Can I return it to stock?

Yes. No wires are cut. 

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.

What is covered under warranty:

  • ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
  • ECU component/hardware failure due to faulty manufacturing.
  • Wire harness failure due to incorrect construction.
  • Product failure due to a manufacturing or assembly problem.
  • Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.

What is NOT covered under warranty:

  • ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
  • Product being used in a way other than the intended use.
  • Rear "warranty void if removed" sticker on ECU has been removed or altered.
  • Failed, shorted, or corroded ECU board due to water damage.
  • Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
  • Wire harness failure due to improper use or rough handling.
  • Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).

How the warranty process works:

If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.