Hondata CANFlex 11th Gen 1.5

Introducing Hondata CANFlex for all 11th gen US Civics and Acura Integra 1.5 for the ultimate flex fuel solution which unleash the full potential of your turbocharged vehicle. Experience easily obtainable power gains, thanks to advanced technology that optimizes fuel combustion for increased horsepower and torque. Delivering the performance you crave. Hondata CANFlex is a 49 state SEMA certified solution for running flex fuel (E85) on turbo 1.5 and 2.0 liter Honda and Acura vehicles. All calibrations are designed for stock Hondas (with stock intake and exhaust). Hondata CANFlex gives you more power than any bolt on. Fill your car with pump gas or Flex fuel anywhere, anytime. Hondata's software gives you the maximum benefit on the least expensive fuel you can buy.

Hondata includes CANFlex tunes in FlashPro Manager. The CANflex calibrations deliver a conservative, safe, flat torque curve for your daily driver. With a flat torque curve, your car becomes a lot more controllable and fun to drive. It comes onto boost earlier and no longer feels like it is falling off boost high in the rev range. This Torque Talk video explains the basics. 

All of our CANFlex calibrations can be modified by an experienced tuner for more power and torque with a built engine.

Advantages

• Makes more power than any bolt-on (eg intake or exhaust)
• 49 state legal: Passes all smog tests
• 100-105 octane
• Less expensive fuel
• Works as an in cylinder intercooler for more power

Disadvantages

• Slightly reduced fuel economy when running E85

Whats in the box?

• Fuel line adaptor with integrated ethanol sensor
• E/B/CAN converter box (Ethanol-Bridge-CAN)
• E/B/CAN Hondata OBD2 adapter cable
• OBD II adapter
• Install instructions

What software is needed?

FlashPro manager 4.5.0 or later

The 11th Gen Civic and Integra 1.5 use an engine very similar to the Accord 1.5. It has VTEC and a better turbo. Hondata CANFlex makes the 11th gen Civic and Acura Integra much more responsive and exciting to drive while keeping the stock intake, cat and passing 49 state emissions. This CANFlex upgrade delivers a conservative yet exciting upgrade to your daily driver with 45 more hp. 

The red circled delta is the power gain. All CANFlex calibrations can be tuned for more power and torque by an experienced tuner. A built engine is recommended.

 The turbo on the 11th gen Civic and Integra is much better than the 10th gen Civic.

11th Gen Civic Si, MT EX and MT EXT and Integra 1.5 MT dyno chart. The 22 Si and Integra 1.5 are identical engines so the dyno gains shown here represent both models.

11th Gen CVT Civic and Acura Integra 1.5 dyno plots

A significant gain across the entire power curve. This car beats a stock 11th gen Civic Si and is so much fun to drive. Much more responsive on fuel that can be as much as $2 per gallon less. Automatic dyno plots show less hp than manual. 

All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.

What is covered under warranty:

• ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
• ECU component/hardware failure due to faulty manufacturing.
• Wire harness failure due to incorrect construction.
• Product failure due to a manufacturing or assembly problem.
• Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.

What is NOT covered under warranty:

• ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
• Product being used in a way other than the intended use.
• Rear "warranty void if removed" sticker on ECU has been removed or altered.
• Failed, shorted, or corroded ECU board due to water damage.
• Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
• Wire harness failure due to improper use or rough handling.
• Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).

How the warranty process works:

If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.