Hondata FlashPro 2013-2015 Honda Accord V6 - RACE

WARNING! THIS PRODUCT IS FOR OFF-ROAD MOTORSPORT/COMPETITION RACING USE ONLY, NEVER TO BE USED ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. 

Hondata FlashPro for 2013-2015 Honda Accord with V6 engine. The FlashPro allows full user tuning and datalogging of engine operation directly over the factory OBD2 port. The Hondata FlashPro connect from your laptop's USB port to your OBD2 diagnostic for quick and easy use. No physical modification to the factory ECU is needed.

Fits:

• 2013-2015 US Honda Accord V6 with manual transmission
• 2013-2015 US Honda Accord V6 with automatic transmission

Features:

• Programmable ECU interface
• Connects via OBDII diagnostic port
• Simple USB 2.0 connection
• Works with Laptop or Desktop computers
• No ECU modification necessary
• Live tuning
• 20 hours of onboard datalogging memory
• FlashPro Manager Windows software
• Read and clear diagnostic trouble codes / check engine lights
• Customizable laptop display gauges
• Bluetooth support for use with the Hondata Mobile App
• Ignition, Fuel, and Idle speed table editing
• VTEC window control
• VCM disable options
• REV and launch control limiters
• Map/table tracing with lambda-air/fuel overlay
• Expanded fuel and ignition tables for forced induction support
• Hondata 4 bar map sensor support
• Support for larger injectors (V6 models only at this time)
• Custom injector dead time / latency editing
• Individual cylinder fuel, ignition, and knock control settings
• Starting calibrations / basemaps included for common engine setups including forced induction basemaps

What do I need to run the FlashPro Manager software?

• Laptop or Desktop computer running 32 bit or 64 bit Windows XP, Vista, 7 or 8
• USB 2.0 port
• Internet access when connecting for the first time to register the system

A brief introduction to the Hondata FlashPro - a new generation of tuning tool and software for modern performance Hondas and Acuras: This video covers the installation the FlashPro Manager software, the USB drivers, software registration and upload of a calibration: One of the latest features added to FlashPro, live tuning gives you the ability to tune your Honda or Acura on the fly without switching off the engine. Live tuning simplifies part throttle tuning and significantly reduces the time and cost of tuning your car. A look at the extensive datalogging capabilities of the Hondata FlashPro. You can view all engine sensor information in real time and record up to 20 hours worth engine data displayed on your own laptop based customized instrument panel. We show how you can use datalogs from the built in wideband to help tune your air fuel ratios. View in HD and full screen to view the screen shots.

All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.

What is covered under warranty:

• ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
• ECU component/hardware failure due to faulty manufacturing.
• Wire harness failure due to incorrect construction.
• Product failure due to a manufacturing or assembly problem.
• Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.

What is NOT covered under warranty:

• ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
• Product being used in a way other than the intended use.
• Rear "warranty void if removed" sticker on ECU has been removed or altered.
• Failed, shorted, or corroded ECU board due to water damage.
• Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
• Wire harness failure due to improper use or rough handling.
• Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).

How the warranty process works:

If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.