Hondata FlashPro 2017+ Honda CRV Turbo 1.5 - RACE
The Hondata FlashPro for 2017+ Honda CRV 1.5 Turbo allows full user tuning and datalogging of the CRV engine using the Hondata FlashPro Manager software. The Hondata FlashPro unit connects to the OBD2 diagnostic port on your CRV, then to your laptop via USB cable. This allows the system to provide real-time programming of your ECU and datalogging of engine operation and engine sensors.
Fitment:
- 2017 Honda CRV with 1.5 Turbo engine and CVT transmission
FlashPro features:
- Hondata Mobile connectivity
- Programmable ECU interface.
- Connects via OBDII diagnostic port.
- USB 2.0 connection
- Works with Laptop or Desktop
- No ECU modification necessary.
- Live tuning
- 20 hours on board datalogging memory.
- FlashProManager Windows software.
- Check and clear diagnostic codes.
- Customizable laptop gauges.
- Dual calibration storage - upload from one of two calibrations stored in the FlashPro.
2017+ CRV Features
- Speed limiter removed
- Ignition, fuel, idle speed, table editing.
- Ignition and fuel temperature compensation tables.
- Rev and launch limiters.
- AFM calibration table.
- Idle speed adjustment.
- Individual cylinder fuel and ignition trim
- Map tracing and lambda overlay
- Advanced graphing
- Starting calibrations included. For a more detailed feature lists see the FlashPro help file.
What else do I need to use this system?
- Laptop or Desktop computer running Windows. (32 or 64 bit Windows XP, Vista, Windows 7, or Windows 8)
- Internet access for first time use to register the system * The software will also work on Intel based Macs running Bootcamp with the above specifications. Has been extensively tested and works well. Parallels and VMWare virtualization software has been tested with no problems found to date.
How will the FlashPro perform on a stock CRV 1.5 Turbo?
With a 100% stock 1.5 CRV Turbo you will benefit from:
- Effortless overtaking
- More torque for hauling heavier loads
- Lowered 0-60 (about 1 second improvement)
- Improved turbo spool
- Raised boost limits
- Better throttle response
- Better mid range power and torque
- Removed speed limit
- No change in part throttle fuel economy
- World Class Datalogging - which will teach you a lot about your engine.
Base maps:
This is an example of the base map provided with the FlashPro. The lower curve was is from a stock CRV on CA 91 octane. The higher power curve is the Hondata base map on CA 91 octane. The CRV will run on either 87 octane or higher. Higher octane makes more power everywhere.
CRV plus 6 psi more boost.
+25 HP and 25 lb-ft torque
Hondata measured the stock CRV boost at around 14 psi. The reflash adds around 6 psi of boost and 13% torque and power increase virtually everywhere.
All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.
What is covered under warranty:
- ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
- ECU component/hardware failure due to faulty manufacturing.
- Wire harness failure due to incorrect construction.
- Product failure due to a manufacturing or assembly problem.
- Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.
What is NOT covered under warranty:
- ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
- Product being used in a way other than the intended use.
- Rear "warranty void if removed" sticker on ECU has been removed or altered.
- Failed, shorted, or corroded ECU board due to water damage.
- Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
- Wire harness failure due to improper use or rough handling.
- Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).
How the warranty process works:
If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.