Home » KTuner Flash V1.2 System 09-14 Honda Ridgeline V6
KTuner Flash V1.2 System 09-14 Honda Ridgeline V6 - HA Motorsports
KTuner Flash V1.2 System 09-14 Honda Ridgeline V6 - HA Motorsports
(0)

KTuner Flash V1.2 System 09-14 Honda Ridgeline V6

- 10 In Stock
$449.00 USD

WARNING! THIS PRODUCT IS FOR OFF-ROAD MOTORSPORT/COMPETITION RACING USE ONLY, NEVER TO BE USED ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. 

KTuner Flash System for 09-14 Honda Ridgeline. The Ktuner Flash system will allow you to reflash your factory ECU via the stock OBD2 diagnostic port. The KTuner flash system plugs into your stock OBD2 diagnostic port, then you connect the KTuner Flash system to your laptop via a USB cable. Using the KTuner software you can reprogram/reflash your stock ECU for performance gains and to suit your engine modifications. For a full list of features, see the KTuner 2009-2014 Honda Ridgeline application page: http://ktuner.com/0914ridgeline/ In order to use the KTuner Flash system, you will need to install the KTuner software and USB drivers onto your laptop. You can download the KTuner software and USB drivers here: http://ktuner.com/downloads/

What is included with the KTuner Flash system?

  • KTuner hardware (part that plugs into your OBD2 port)
  • USB cable (plugs into your laptop on one end, and into the KTuner hardware on the other end)
  • Pair of KTuner window decals
  • KTuner software (download for free here: http://ktuner.com/downloads/)

Fits:

2009-2014 Honda Ridgeline.  Please be sure the part number on your vehicle's PCM/ECU is listed below:

  • 37820-RJE-A81 through A84
  • 37820-RJE-A91 through A94

Features:

  • Real-Time Logging
  • Ignition/Fuel Tuning
  • Knock Tuning
  • Throttle Control Maps
  • Rev Limiter Settings
  • 2-Step Settings
  • VTEC Window Control
  • Closed Loop Control
  • Disable Sensors (VSA, knock, etc.)
  • Fuel Cut Parameters
  • Fuel Correction Parameters
  • Ignition Correction Parameters
  • Idle Control Parameters.

 

Speed limiter completely removed. Please adhere to your tire speed limitations and note this feature is for off-road use only.

What tunes/basemaps are included for the 09-14 Honda Ridgeline?

At this time, only the factory calibration file is included within the KTuner software.  Use this as a starting point, then tune as desired from there.

All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.

What is covered under warranty:

  • ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
  • ECU component/hardware failure due to faulty manufacturing.
  • Wire harness failure due to incorrect construction.
  • Product failure due to a manufacturing or assembly problem.
  • Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.

What is NOT covered under warranty:

  • ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
  • Product being used in a way other than the intended use.
  • Rear "warranty void if removed" sticker on ECU has been removed or altered.
  • Failed, shorted, or corroded ECU board due to water damage.
  • Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
  • Wire harness failure due to improper use or rough handling.
  • Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).

How the warranty process works:

If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.