Home » Clear ECU Cover with etched Hondata Logo for OBD1 ECU's with S300
Clear ECU Cover with etched Hondata Logo for OBD1 ECU's with S300 - HA Motorsports
Clear ECU Cover with etched Hondata Logo for OBD1 ECU's with S300 - HA Motorsports
(2)

Clear ECU Cover with etched Hondata Logo for OBD1 ECU's with S300

Out of stock - Backordered
$25.00 USD

Clear ECU cover with etched Hondata logo for OBD1 USDM Civic / Integra style ECU's. This clear ECU lid is setup for use specifically with OBD1 ECU's that have a Hondata S300 installed. The clear cover has machined out holes with corresponding nylon inserts that will allow the lid to fit flush with the top of the ECU while still holding the S300 firmly in place. Includes 3 replacement white nylon spacers for your S300. You will need to swap out these included shorter nylon spacers with the full length ones on your S300 to allow the lid to fit flush with your S300 and ECU.

Includes:

  • Clear ECU cover with etched Hondata logo
  • 3 x shorter nylon spacers
Does NOT include ECU, S300, screws, etc.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
P
Paul

Nice looking ecu cover.

L
Logan

Fit like a glove! You'll need the new posts for sure, which is why they're there, or at least I needed them. Otherwise, it makes the ecu look clean and sleek, plus I like to see those sexy internals!

All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.

What is covered under warranty:

  • ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
  • ECU component/hardware failure due to faulty manufacturing.
  • Wire harness failure due to incorrect construction.
  • Product failure due to a manufacturing or assembly problem.
  • Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.

What is NOT covered under warranty:

  • ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
  • Product being used in a way other than the intended use.
  • Rear "warranty void if removed" sticker on ECU has been removed or altered.
  • Failed, shorted, or corroded ECU board due to water damage.
  • Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
  • Wire harness failure due to improper use or rough handling.
  • Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).

How the warranty process works:

If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.