S300 PRO ECU Package [ Includes ECU with S300 System ]

We are excited to release our S300 PRO ECU Package!  This is a new production OBD1 ECU with the Hondata S300 system.  YES, a NEW ECU circuit board with ~80% brand new components assembled right here at our facility!  Through a wonderful collaboration with "The ECU Guy" and Herse-Tuning, we are able to offer a brand-new production stunning purple OBD1/P28 spec circuit board.  We start with the brand-new board and install all new resistors, electrolytic and ceramic capacitors, as well as many other new components and IC's.  Every component that is still available new is sourced and installed.  The remaining items that are needed (main processor, etc.) are sourced from our huge ECU inventory and professionally installed. 

In addition to being a new P28 ECU, we provide and install a new Hondata S300v3 system, add PWM boost (boost by gear) circuitry, and prep for our coil-on-plug system.  This full-featured ECU is ready to go for anything you can ask of it.

** This is the complete ECU, including a new Hondata S300v3 system fully installed **

What else do I need to use this ECU?

• Laptop computer running Windows XP, Vista, 7, 8, or Windows 10 (laptop must have atleast 1 available USB port).
• Internet connection to register the system.

Features:

• Brand-new circuit board.  This is not a refurbished old board, it is a new production unit, in a stunning purple color!  This board is produced to be a copy of a factory OBD1 P28 ECU (1720).
• Approximately 80% brand-new components.  Every component that can be sourced new is installed.  The remaining items that are no longer produced are sourced and transferred from a used OEM Honda ECU.
• Brand-new Hondata S300V3 tuning system fully installed and tested
  
• Boost by gear / PWM-boost circuitry installed so this can be used with a boost control solenoid if desired
• Coil on Plug kit headers preinstalled.  If you are using, or will eventually use our COP kit, this ECU is already prepped and won't need further modifications.  You can still use the factory Honda distributor instead if you want to though or even use a Hondata CPR kit.
• Uses factory OBD1/P28 ECU pinouts.  ZERO wiring changes needed if you are already using a P28 spec ECU.
• Powder-coated ECU casing for a winning finish, topped off with clear top and bottom lids, and new stainless screws.
• All HA Motorsports ECU's, products, and services include a One Full-Year VIP Warranty.

All products sold by HA Motorsports include a no hassle 1 year VIP warranty against ANY manufacturing defects. We are proud to honor this warranty as we feel 100% confident in our products to perform flawlessly as intended and your complete satisfaction. Upon the occasion that a product of ours fails at any time within 1 year of purchase due to any manufacturing defects, your product will need to be returned to us for inspection to determine the cause of the failure and inspection for repair or replacement. Your 100% satisfaction is our goal and if you are not completely happy we'd like every chance to make it right.

What is covered under warranty:

• ECU board failure due to faulty ECU components (ie: injector driver fails, CPU processor fails, specific ECU circuit does not operate as intended, poor soldering, etc.)
• ECU component/hardware failure due to faulty manufacturing.
• Wire harness failure due to incorrect construction.
• Product failure due to a manufacturing or assembly problem.
• Outside company products. We will handle the hassle of shipping your product back to the manufacturer for warranty processing. Let us replace your product for you and we will deal with the warranty process with the manufacturer later.

What is NOT covered under warranty:

• ECU failure due to improper vehicle wiring (ie: ECU component fries due to sensors being connected incorrectly, low resistance fuel injectors being used without a resistor box, ROM chip being installed backwards by user, customer attempts to modify ECU in ANY way other than intended, etc.)
• Product being used in a way other than the intended use.
• Rear "warranty void if removed" sticker on ECU has been removed or altered.
• Failed, shorted, or corroded ECU board due to water damage.
• Any and all outside labor charges associated with removing and replacing product or diagnosing product failure.
• Wire harness failure due to improper use or rough handling.
• Cosmetic variances from manufacturing (ie: ECU lid has variation in powder coat texture or color within acceptable limits, wire harness color variations within acceptable limits).

How the warranty process works:

If you've determined that a product has failed due to a manufacturing defect, please contact us via email at sales@hamotorsports.com to review the symptoms you are experiencing to allow us to assist you with troubleshooting before shipping your product back to us for warranty. Many times, we can help you with the problem and determine what is being done incorrectly or how to configure the product properly to restore correct operation. If after we discuss the issues you are experiencing we determine that your product may need warranty replacement or inspection we will instruct you how to return it to us. Please note that we test EVERY ECU, EVERY ECU package, and wire harness components on our state-of-the-art testing equipment for complete proper operation before packaging and shipping to customers. PLEASE verify ALL wiring, installation, software settings, etc. are correct BEFORE contacting us for warranty repair/replacement.